You might be wondering that doesn’t everyone know how to charge their electric scooter. Well, it is the right way to do that. But unfortunately, most users ignore the powering method and damage their machines.

E-scooters are getting widely popular due to their features and ease of use. However, suppose you own one; you can do a few things to ensure it stays running for a long time. Keep reading to understand how you can properly charge your scooter.

E-scooter Batteries

An e-scooters battery is its fuel tank. It powers the engine, lights, and other accessories. Most adult electric scooters contain Li-ion batteries as they last longer and perform better. But, if you’re a kid e-scooter, it may contain a Lead-acid battery.

An average e-scooter battery can take up to 300-500 charge cycles before it diminishes its performance. It means a user can ride up to 10000 miles before needing to replace the cell. This figure is average, and you can get a better performance out of your battery if you take its care.

Charging your e-scooter is one of them.

Charge Your Scooter the Right Way

When it comes to charging your electric scooter, there are some right ways to go about it. However, as you will be dealing with an electric supply, you should take the necessary precautions beforehand.

Once you are ready, follow these steps to charge your scooter the right way carefully.

1. Plug-in the Charger

The first step to recharging your electric bike is to plug the charger into a power outlet. This is a proven way to keep the adapter and its capacitors safe. Always put the charger into the switch before connecting it to your scooter unless stated otherwise in the manual.

Make sure the switch is turned off before doing that. Once you plug the adapter into the switch, hold the other end to connect it to the scooter.

2. Connect to the Scooter

Please turn off your scooter and place it on a dry and clean surface. Next, remove the protective cover from the charging port and clean any dirt or dust that might’ve accumulated in or around the port.

Then put the charger into your e-scooters port with care. If you’re too harsh, it can damage the charging tip. Lastly, turn on the power socket to start the charging process.

3. Waiting Time

Let the e-scooter charge till the light on the charger turns green. Then, disconnect the power and close the charging port on your bike.

Most chargers will turn green before the battery percentage reaches 100. If you’re an advanced model, you can view the battery percentage on the bike. Otherwise, you can ride the electric scooter as it is.

Tip: As most e-scooters run on Li-ion batteries, keeping the charge between 30-80% will optimise the battery and increase its life.

4. Disconnect

Once you disconnect the power supply, turn off the power socket and keep the charger in a clean, dry place. Charge as often as required but be careful while handling electric machines and sockets.

These steps will ensure you properly charge your e-scooters without wasting battery life. You can also be mindful of your bike use to further preserve the battery for essential tasks.

How do Electric Scooters Charge? Tips

Now that you’ve charged your e-scooter, here are some additional tips to optimise the process. These are not essential but will help in increasing the longevity of your bike’s battery.

  1. If you’re storing your e-scooter for a long time, keep the battery at around 40%. Significantly during winter months, storing the battery on low charge or full charge can quickly degrade its life
  2. Keep your e-scooter in a clean, warm, and dry place to prevent excessive moisture or cold from affecting the battery. Storing your electric vehicle above 30 C will degrade the battery fast.
  3. 30-80% per cent charge is called the sweet zone for Li-ion batteries. It optimises their performance without compromising the battery life. Try to keep the charge between these figures if you want your e-scooter to last a long time
  4. Lastly, don’t charge your e-scooter just after you take it out in the cold. Let the battery warm up to room temperature before plugging it in. Additionally, if the temperature is over 45 C, it can also damage the battery

Conclusion

It might not be a complex task to get your e-scooter charged, but minor changes in your routine can be beneficial in the long run. However, especially if you live in really hot and humid or cold regions, you need to be vigilant of your charging techniques.